| BJ More Specifications: Gross vehicle weight rating 1,875kg No. of seats 4 Dimensions Wheelbase 2,400mm Overall length, with front bumper (OAL) 3,793mm C/1 of rear axle to end of frame (AF) 813mm Bumper to center of front axle (BA) 580mm Turning radius 5,500mm Tread - front wheels 1,390mm Tread - rear wheels 1,350mm Ground clearance - front 215mm Ground clearance - rear 210mm Overall width - front (with fender end) 1,575mm Overall width - gear (with outside of deck) 1,575mm Height from top to frame to ground, loaded (approximate) - front 541mm (approximate) - rear 616mm Frame Pressed steel, Girder type, 50 x 130 x 3.2m Engine Six cylinders, valve-in-head type, 84.1mm bore, 101.6 mm stroke. Displacement, 3,386cc; compression ratio, 6.4; Brake hp., 85 at 3,200r.p.m.; Maximum torque, 22kg-m at 1,600 r.p.m. Four steel backed, replaceable-shell, precision-type main bearings; total projected area, 91.5 sq. cm.,crank pin bearing; total projected area, 107 sq. cm. Lubrication Pressure, Splash and Jet type. Specially treated paper oil filter. Oil capacity, 4.1 qt. (4,7lt) Cooling system Centrifugal pump circulation, fin-and-tube radiator. Pump driven by V-type fan belt. Capacity, 16.7 qt. Bellows-type thermostat. Ignition 6-volt, vacuum control, full-automatic distributor. Generator 6-volt, 40-ampere, shunt-wound, belt-driven. Lights Semi-sealed-beam headlights, interchangeable with sealed-beam headlights of SAE standards. Battery Semi-sealed-beam Starting motor 6-volt, maximum torque, 1.6kg-m. Carburetor Downdraft type Air Cleaner Synthecic resin treated paper filter type. Fuel system Diaphragm-type fuel pump driven from camshaft. Gasoline filter. 41.5lt tank. Clutch 275mm, single-plate, with rubber vibration damper. Transmission Four speed forward, one reverse. Transmission reductions First, 5.53:1; second, 3.48:1; third, 1.71:1; fourth, 1:1; reverse, 5.6:1. Transfer Single stage Propeller shaft Large-diameter, heavy-steel tubing. 2-piece shaft, first for front drive. second for rear drive. Dynamically balanced. Universal joint Trunnion type spider and needle roller bearing. Axles Four wheel drive. Front, full-floating; Rear, semi-floating. Banjo type, steel housing. Pinion, overhung mounted on taper roller. Reduction ratio, 4.11:1. Steering gear Hindley-worm-and-sector-roller type. Gear ratio, 21:1. Brakes Service: 4-wheel, hydraulic, internal-expanding type. Parking: External band brake mounted transmission rear end. Springs Front and rear, semi-elliptic. Front, 1,000mm Span, 45mm x 6mm-9; Rear, 1,150mm Span, 45mm x 6mm-10. Wheels Steel disc wheel. Standard tires 6.00-16, 6-ply or 6.50-16, 6-ply. Controls Throttle, choke, light, and winker control knobs on instrumental panel. Accelerator, clutch, and service brakes operated by pedals. Accessories Standard: Canvas cove, 4-shock absorber, one spare tire, hand tool set, auxiliary gasoline tank. (Optional: Pintle hook, trailer socket, red lamp, siren.) Different bodies available on the same chassis Standard: as specified above. Toyota BJ Truck: Loading capacity 500kg No. of seats 2 in cab, 6 in deck. Toyota BJ Pickup: Loading capacity 500kg No. of seats 5 |
| 1951-1955 |